Micro fine boring head
Ø 0.3 - 19.1
Ø 0.3 - 19.1
Fine boring heads
Ø 3.0 - 88.1
Ø 3.0 - 88.1
Multi-Head
Ø 3.0 - 320.1
Ø 3.0 - 320.1
Vario-Head
Ø 3.0 - 152.1
Ø 3.0 - 152.1
Fine boring head
Ø 23.9 - 203.1
Ø 23.9 - 203.1
Fine boring head
Ø 86.0 - 402.1
Ø 86.0 - 402.1
Combi-Head
Ø 29.5 - 115.5
Ø 29.5 - 115.5
Fine boring module
Contact
TECHNICAL SUPPORT
Henry Toth
Application Engineer
Tel.: +41 (0) 71 634 85 10
h.toth@swisstools.org
Finishing tools Multi-Head Ø3.0-320.0
Fine boring head MULTI Ø3.0-320.0- for boring bars with a shank diameter of 16mm and fine boring bridges
- diametrical adjustment with maximal reduced reversal backlash
- 0.01mm diametrical adjustment resp. 0.002mm by nonius
- with inner coolant supply
- boring bars go through head (L1)
| Bestell-Nr. | Schnittstelle | System Ø D | D1 | Ø A min.-max. | Ø A1 min.- max. | L | L1 | L2 | dxf | step |  |
|
| 261.063.095C | DIN 69893 HSK 63 A | - | 63 | 3 - 88.1 | 86 - 320 | 96 | 72.5 | 125 |  |
 |
 |
 |
| 261.412.090C | MAS BT 40 | - | 63 | 3 - 88.1 | 86 - 320 | 91 | 81 | 120 | |
|
|
 |
| 261.415.090C | DIN 69871 AD 40 | - | 63 | 3 - 88.1 | 86 - 320 | 91 | 81 | 120 | |
|
|
|
Swiss Tool Systems AG
Wydenstrasse 28
CH-8575 Bürglen
S witzerland
Wydenstrasse 28
CH-8575 Bürglen
S witzerland
Tel. +41 (0) 71 634 85 20
www.swisstools.org
www.swisstools.org
Swiss Tool Systems AG