Micro fine boring head
Ø 0.3 - 19.1
Ø 0.3 - 19.1
Fine boring heads
Ø 3.0 - 88.1
Ø 3.0 - 88.1
Multi-Head
Ø 3.0 - 320.1
Ø 3.0 - 320.1
Vario-Head
Ø 3.0 - 152.1
Ø 3.0 - 152.1
Fine boring head
Ø 23.9 - 203.1
Ø 23.9 - 203.1
Fine boring head
Ø 86.0 - 402.1
Ø 86.0 - 402.1
Combi-Head
Ø 29.5 - 115.5
Ø 29.5 - 115.5
Fine boring module
Contact
TECHNICAL SUPPORT
Peter Heinemann
Director Engineering and Product Management
Tel.: +41 (0) 71 634 85 03
p.heinemann@swisstools.org
Finishing tools analog / digital Ø23.9-203.1
Fine boring heads Ø 23.9-203.1- diametrical adjustment nearly with-out reversal backlash
- 0.01mm diametrical adjustment resp. 0.002mm by nonius
- with inner coolant supply
Start inquiry
| Bestell-Nr. | D | d1 | Ø A min. | Ø A max. | L | SW/AF | Wendeplattenhalter | dxf | step |  |
|
| 250.200.000C | 20 | 11 | 23.9 | 31.1 | 40 | 17 | 254.200/201.xxx |  |
 |
 | |
| 250.250.000C | 25 | 14 | 30.9 | 40.1 | 50 | 22 | 254.250/251.xxx | |
|
 | |
| 250.320.000C | 32 | 18 | 39.9 | 51.1 | 65 | 27 | 254.320/321.xxx | |
|
| |
| 250.420.000C | 42 | 24 | 50.9 | 67.1 | 90 | 36 | 254.420/421.xxx | |
|
| |
| 250.550.000C | 55 | 30 | 66.9 | 87.1 | 115 | 46 | 254.550/551.xxx | |
|
| |
| 250.720.100C | 72 | 40 | 86.9 | 116.1 | 75 | 60 | 254.550/551.xxx | |
| ||
| 250.940.100C | 94 | 50 | 115.9 | 153.1 | 99 | 75 | 254.550/551.xxx | |
|
Swiss Tool Systems AG
Wydenstrasse 28
CH-8575 Bürglen
S witzerland
Wydenstrasse 28
CH-8575 Bürglen
S witzerland
Tel. +41 (0) 71 634 85 20
www.swisstools.org
www.swisstools.org
Swiss Tool Systems AG