![](/images/productgroups4/10201010.jpg)
Micro fine boring head
Ø 0.3 - 19.1
Ø 0.3 - 19.1
![](/images/productgroups4/10201020.jpg)
Fine boring heads
Ø 3.0 - 88.1
Ø 3.0 - 88.1
![](/images/productgroups4/10201030.jpg)
Multi-Head
Ø 3.0 - 320.1
Ø 3.0 - 320.1
![](/images/productgroups4/10201040.jpg)
Vario-Head
Ø 3.0 - 152.1
Ø 3.0 - 152.1
![](/images/productgroups4/10201050.jpg)
Fine boring head
Ø 23.9 - 203.1
Ø 23.9 - 203.1
![](/images/productgroups4/10201060.jpg)
Fine boring head
Ø 86.0 - 402.1
Ø 86.0 - 402.1
![](/images/productgroups4/10201070.jpg)
Combi-Head
Ø 29.5 - 115.5
Ø 29.5 - 115.5
![](/images/productgroups4/10201080.jpg)
Fine boring module
Contact
TECHNICAL SUPPORT
![<strong>Peter Heinemann</strong> <br>Director Engineering and Product Management](/images/persons/peter-heinemann.jpg)
Peter Heinemann
Director Engineering and Product Management
Tel.: +41 (0) 71 634 85 03
p.heinemann@swisstools.org
Finishing tools Multi-Head Ø3.0-320.0
Fine boring head MULTI Ø3.0-320.0- for boring bars with a shank diameter of 16mm and fine boring bridges
- diametrical adjustment with maximal reduced reversal backlash
- 0.01mm diametrical adjustment resp. 0.002mm by nonius
- with inner coolant supply
- boring bars go through head (L1)
Start inquiry
Bestell-Nr. | Schnittstelle | System Ø D | D1 | Ø A min.-max. | Ø A1 min.- max. | L | L1 | L2 | dxf | step | ![]() |
|
261.063.095 | DIN 69893 HSK 63 A | - | 63 | 3 - 88.1 | 86 - 320 | 96 | 72.5 | 125 | ![]() |
![]() |
![]() | |
261.412.090 | MAS BT 40 | - | 63 | 3 - 88.1 | 86 - 320 | 91 | 81 | 120 | ![]() |
![]() |
![]() | |
261.415.090 | DIN 69871 AD 40 | - | 63 | 3 - 88.1 | 86 - 320 | 91 | 81 | 120 | ![]() |
![]() |
![]() | |
261.550.065 | MBM 55 modular | 55 | 63 | 3 - 88.1 | 86 - 320 | 66 | 96 | 95 | ![]() |
![]() |
![]() |