Micro fine boring head
Ø 0.3 - 19.1
Ø 0.3 - 19.1
Fine boring heads
Ø 3.0 - 88.1
Ø 3.0 - 88.1
Multi-Head
Ø 3.0 - 320.1
Ø 3.0 - 320.1
Vario-Head
Ø 3.0 - 152.1
Ø 3.0 - 152.1
Fine boring head
Ø 23.9 - 203.1
Ø 23.9 - 203.1
Fine boring head
Ø 86.0 - 402.1
Ø 86.0 - 402.1
Combi-Head
Ø 29.5 - 115.5
Ø 29.5 - 115.5
Fine boring module
Contact
TECHNICAL SUPPORT
Henry Toth
Application Engineer
Tel.: +41 (0) 71 634 85 10
h.toth@swisstools.org
Finishing tools Ø3.0-88.1
Fine boring heads Ø 3.0-88.1- diametrical adjustment with maximal reduced reversal backlash
- 0.01mm diametrical adjustment resp. 0.002mm by nonius
- with inner coolant supply
- boring bars go through head (L1)
| Bestell-Nr. | ST | D | D1 | Ø A min. | Ø A max. | L | dxf | step |  |
|
| 204.050.025.045 | ST5 | 50 | 55 | 3 | 88.1 | 45 |  |
 |
 |
 |
| 204.064.025.045 | ST6 | 64 | 55 | 3 | 88.1 | 45 | |
|
| |
| 208.440.055.090 | SK 40 | 55 | 3 | 88 | 90 | 70 | |
|
| |
| 208.540.055.090 | BT 40 | 55 | 3 | 88 | 90 | 63 | |
|
|
|
| 208.806.055.095 | HSK 63 A | 55 | 3 | 88 | 95 | 69 | |
|
|
|
Swiss Tool Systems AG
Wydenstrasse 28
CH-8575 Bürglen
S witzerland
Wydenstrasse 28
CH-8575 Bürglen
S witzerland
Tel. +41 (0) 71 634 85 20
www.swisstools.org
www.swisstools.org
Swiss Tool Systems AG