![](/images/productgroups4/10103011.jpg)
Heat shrink Chuck Typ S
![](/images/productgroups4/10103012.jpg)
Heat shrink Chuck Typ L
![](/images/productgroups4/10103013.jpg)
Heat shrink Chuck Typ M
![](/images/productgroups4/10103021.jpg)
End mill adapter Weldon Typ S
![](/images/productgroups4/10103022.jpg)
End mill adapter Weldon Typ L
![](/images/productgroups4/10103030.jpg)
Collet Chuck ER
![](/images/productgroups4/10103040.jpg)
Milling arbor
![](/images/productgroups4/10103050.jpg)
Tapping Chuck
Contact
TECHNICAL SUPPORT
![<strong>Peter Heinemann</strong> <br>Director Engineering and Product Management](/images/persons/peter-heinemann.jpg)
Peter Heinemann
Director Engineering and Product Management
Tel.: +41 (0) 71 634 85 03
p.heinemann@swisstools.org
Heat shrink Chuck Typ S
- • standard design for a better clamping force
• for solid carbide and high speed steel tools
• shank tolerance h6
• true running 3 μm
• fine balanced toolholders G 2.5/25000 r/min
• 2 Cool-Jet holes (lockable)
• axial adjustment
![](/images/productgroups4/10103021_1.jpg)
Cool-Jet for heat shrink chuck and weldon adapter
The key feature of the Cool-Jet system are two exterior cooling holes. The holes are directed to the tool center to avoid the deflection of the coolant jet by centrifugal force. The holes are lockable by using set screws.
• optimized coolant bores, aimed at center
• extended tool life
• higher reliability of cutting process
• no more balls of chips on tool